Practice type · Chiropractic offices
Red Light Therapy for Chiropractors
Red Light Wellness® builds commercial red light therapy beds that are Class II medical devices registered with the FDA. For more than 40 years, our family-owned company has designed and manufactured commercial light therapy equipment in St. Louis, helping chiropractic practices add a profitable, patient-pay service without disrupting clinical workflows.
American-made. Continuously engineered.
Class II medical device registered with the FDA
Full-body session under 15 min
Made in St. Louis, USA
Build
Commercial-grade
Made in
FDA-registered facility
Wavelengths
660nm + 850nm
Session
10–15 min
Why chiropractors add commercial red light therapy
A modality that works with your hands, not against your schedule.
Photobiomodulation delivers red (625–670 nm) and near-infrared (830–910 nm) light into tissue, where research suggests it supports cellular energy production, local circulation, and the body’s normal recovery and inflammatory response. For a chiropractor, that maps cleanly onto how you already work.
Prep before the adjustment
A short whole-body session before manual work can support circulation and muscle readiness, so soft tissue is warmed and receptive when a patient reaches your table.
Recovery after care
Used after an adjustment, PBM supports the recovery and inflammation response that follows manual therapy, part of a rounded care plan rather than a replacement for it.
New revenue & retention
A cash-pay modality that isn’t tied to insurance reimbursement, sold as sessions, packages, or memberships that give patients a reason to stay on your schedule.
Photobiomodulation supports recovery, circulation, and normal tissue and inflammatory response. Individual results may vary. Not intended to diagnose, treat, or cure any disease. Consult a healthcare professional before use.
Which Miracle model fits a chiropractic office
Match output and electrical service to your patient volume.
Most chiropractic offices land on one of two beds in the Wellness Collection, both of which run on a standard dedicated 220V, 30-amp circuit, the electrical service most treatment rooms can accommodate without a heavy panel upgrade. Higher-volume clinics that want shorter effective sessions step up to the 40- or 50-amp models.
Common fit · 30 AMP
The Miracle 5040
The accessible entry into whole-body PBM for a growing practice.
504 mW/cm² irradiance · 2,553 LEDs · 30 AMP
Common fit · 30 AMP
The Miracle 6200
More output on the same standard circuit for busier rooms.
600 mW/cm² irradiance · 2,000 LEDs · 30 AMP
High-performance
Max Miracle 9600
Higher output for a busy aesthetics floor.
960 mW/cm² irradiance · 3,200 LEDs · 50 AMP
Room & throughput fit
It fits the room and the rhythm you already run.
The 5040 and 6200 share a 93″ × 37.5″ × 51″ footprint, so a treatment room of roughly 8′ × 8′ leaves clearance for easy entry and exit off the elevated bench design. Each needs a dedicated 220V, 30-amp circuit, something to confirm before delivery, and something our team helps you plan.
Throughput is where PBM earns its place in a chiropractic office. A full-body treatment runs head to toe in under fifteen minutes, so a session slots into the same window a patient already spends waiting or resting. High, even output means you can treat roughly twice as many patients in half the time compared with lower-powered equipment, without adding staff to run the bed.
At a glance
What a room needs
Roughly 8′ × 8′ of floor space
Dedicated 220V, 30-amp circuit (5040 / 6200)
Under-15-minute full-body sessions
Elevated bench for easy entry and exit
Runs unattended once a patient is set up
Built for a clinic floor
ROI considerations
Run the numbers before you commit.
Chiropractic offices typically price PBM as a cash-pay add-on: single sessions in the roughly $25–$60 range, multi-session packages at a per-visit discount, or an unlimited monthly membership commonly in the $75–$200 range that stacks onto existing care plans. Because the bed runs largely unattended, incremental labor is low, and a short session length means a single room can turn over many patients a day.
Payback depends on your session price, how many sessions you run per day, and your operating days, not on a fixed sticker figure. Work the full model, including membership utilization and financing, on our ROI hub before you decide.
$25–$60
Typical per-session range
$75–$200
Typical monthly membership range
2×
Patients treated in half the time
Ranges are illustrative for planning only and vary by market, positioning, and utilization. Not financial advice. Individual results may vary.
Operational workflow
How PBM runs inside a chiropractic practice.
1
Intake & consent
Screen for contraindications, provide protective eyewear, and set expectations as a supportive modality, not a cure, before the first session.
2
Position in the visit
Schedule the session before a manual adjustment to prep tissue, or after to support recovery, so the bed complements the care you already deliver.
3
Run the session
A staff member sets the patient on the elevated bench and starts the under-15-minute cycle; the bed runs unattended while your team works elsewhere.
4
Convert to a plan
Turn a first session into a package or membership, so PBM becomes a recurring revenue line and a retention hook, not a one-off.
Every bed ships turn-key: staff training, marketing materials, and a vibration plate are included, backed by US-based support and a 10-year frame warranty, so your team is running sessions confidently from day one.
Photobiomodulation supports recovery, circulation, and normal tissue and inflammatory response. Individual results may vary. Not intended to diagnose, treat, or cure any disease. Consult a healthcare professional before use.
Chiropractor FAQ
Questions practice owners ask.
-
No. Photobiomodulation is a supportive modality: research suggests it supports circulation, cellular energy, and the body’s normal recovery and inflammatory response. It is not intended to diagnose, treat, or cure any disease, and it complements chiropractic care rather than replacing it. Individual results may vary; consult a healthcare professional before use.
-
Most chiropractic offices choose the Miracle 5040 or Miracle 6200 both of which run on a standard dedicated 220V, 30-amp circuit. Higher-volume clinics that want more output step up to the Big Miracle 7200. The full comparison guide lays out every spec side by side.
-
The 5040 and 6200 measure 93″ × 37.5″ × 51″ and fit a room of roughly 8′ × 8′ on a dedicated 220V, 30-amp circuit. Our team reviews your room and electrical service during planning so everything is ready before delivery.
-
Practices commonly price single sessions around $25–$60 and memberships around $75–$200 a month, though ranges vary by market. Payback depends on your price, sessions per day, and operating days, model it on our business ROI hub.
-
Every Red Light Wellness bed is a Class II medical device registered with the FDA, produced in an FDA-registered facility. Precise regulatory status, stated as registration, is one of the clearest ways to separate professional equipment from consumer imports.
Next steps for your practice
Bring whole-body PBM into your chiropractic office.
Request current pricing or book a five-minute discovery call. We’ll help you pick the right model, plan the room and circuit, and map the payback for your patient volume, no pressure, no obligation.