FDA-Registered Facility · Hosted In-Person Tour
See how it's built.
Then try every model.
The real reason to come is to be here in person. Tour the factory and see how every commercial-grade bed is made, try and use all the models in our in-factory demo store, and sit down with Ron and Shawn to plan how to start red light therapy in your own space.
Your visit · Led by CEO or VP
01
Receiving & component QA
02
Emitter board assembly
03
Chassis & frame build
04
Burn-in & output testing
05
Final inspection & sign-off
06
Packout & commercial dispatch
07
Experience the models on the floor
Facility status
FDA-registered
Build standard
Two wavelengths
Assembly
In-house /
Not contracted
Output tested
100% / every unit
Inside the building
Before you put a bed like this on your floor, you want to know it is built the way we say it is, and you want to feel the models for yourself. The only way to do both is to be here. You see the real facility and the real test stations, you use every model in our demo store, and you talk it through with the people who build them.
Being here is the whole point.
The route
Your host walks you through every step.
STATION 01
Receiving & component QA
Every inbound component is logged and inspected before it touches a build. Boards, lenses, drivers, and housings each get checked against spec on arrival.
Traceable lots
STATION 02
Emitter board assembly
Diode arrays are populated and seated on the bench, then checked for placement and seating before they ever get power. This is where wavelength consistency starts.
660nm + 850nm
STATION 03
Chassis & frame build
Commercial-grade frames are assembled to carry continuous-duty use. They are built for a clinic floor that runs all day, not a closet that runs twice a week.
Continuous-duty
STATION 04
Burn-in & output testing
Each system runs a burn-in cycle, then gets measured for output. Units that drift out of tolerance do not advance. They go back.
100% tested
STATION 05
Final inspection & sign-off
A human signs off on every unit. Cosmetic, mechanical, and output checks are recorded against the unit's build record before it's cleared to ship.
Named sign-off
Packout & commercial dispatch
STATION 06
Systems are packed for freight and routed to commercial accounts. The build record travels with the unit so the facility can trace it for the life of the equipment.
Build record attached
THE DEMO STORE
Try and use every model
Then you spend real time in our in-factory demo store. You use every model, feel the build, and picture each one on your own floor. This is the part a spec sheet cannot give you.
Hands-on with every model
THE SIT-DOWN
Plan it with Ron and Shawn
Then you sit down with Ron and Shawn. They have started red light therapy in a wellness center themselves, so they help you map out how to set it up in your space. Personal, specific, from people who have done it.
Personal setup guidance
What this facility means
An FDA-registered facility is a verifiable fact. So we let you verify it.
Red Light Wellness systems are Class II medical devices, registered with the FDA. The systems are built in an FDA-registered facility under medical-grade and commercial-grade build standards. That registration is a matter of record, and this tour is the proof you can walk through.
Built in an FDA-registered facility, not a contracted line
Commercial-grade and medical-grade build standards throughout
Every unit output-tested and signed off before dispatch
Build record stays with the equipment for full traceability
Four decades of engineering sit behind these standards. The full story lives on the Manufacturing Process page. This tour is where you see it firsthand.
Plan your visit
Come to the factory.
Your visit is hosted in person by Ron and Shawn. You tour the build, use every model in our demo store, and plan your setup with the people who started red light therapy in a wellness center themselves. Two ways to start are below. If you already work with a Red Light Wellness rep, request your visit and name them. No rep yet? Book a 5-minute call and your rep sets it up.
A 5-minute call confirms fit before anything gets scheduled
Already talking to a rep? Go straight to requesting your visit
Use every model in our demo store, and meet Ron and Shawn in person
No Rep yet? It’s as easy as a 5 minute call. Schedule with our experts today.
